Recent content by robert931

I would try to break the bolt first with brute force and ignorance, if that fails I would take the dremel to it.

actualy on a closer look at the chassis I think it would be wise to renew the pice that the bracket bolts onto is there any chance you would happen to know what the part number for this bit too. sorry for asking so many questions its just the td5 seems soo much more complicated than it needs...

try shaking it top to botom if the wheel bearing gone it should shake all directions

thank you very much your a gentle man !!

can any one help as Im trying to get the part when the shop is still open

Hi there I was chaingin the oil in the td5 and I noticed what I think is the anti roll bar hanging off. it has a bush at either end and is connected to the ace ram thing at the drivers side. and the "U" shaped bracket that holds the bush in it in has fallen of. or became missing at some point...

I havent had the td5 on the slippy stuff yet. but the old 300tdi is like a pig in muck loves it.

thanks I will let yous know how I get on. I ordered a set of copper washers and injector seals (the place recomended them to be replaced too) I will have them hopefully tomorow or monday, both genuine L/R for £25.00

excelent and thank you both for your help !!

Im going to give my 2 discos a service, this is what I plan to do oil filter, fuel filter, air filter, diff oil, gear box oil, so a few questions, 1 what type of oils do I use for engine, diff and gearbox. 2 where is the best place to get filters, oil and the likes. 3 how do I dispose of...

I have quite a similar problem with mine. how did you change the washers ??

had a google and most people say that I need to get the coedes read first. will a standard obd2 code reader do or do I need some fancy one ? as Ive read some conflicting things. I also read that I should take It down a steep hill with the hill decent thing on to get the shuttle valves...

Hi there was out fishing this evening and I was pulling up a steep loose gravely type hill and the 3 lights came on just at the top. it goes away when you switch the engine on and off, Sometimes you can hear like a pumping noise from the front passenger side under the bonnet when coing up the...

thanks for the advice looks like the welder will be coming out for the disco and the freelander well. I may try to fix depending on what its like the freelander was just an impuls auction buy for not much more than scrap price.

Hi there I was just wondering if it is possible to fit a 2.5 tdi disco engine in a freelander. As I have a 1996 disco which it rotten. but has a good engine, gear box and diffs. all low miles And I went and bought a freelander last night that had broke the cam belt. )its petrol any way so...