Recent content by r.rover

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. R

    De-cat

    i thought if you are running on lpg you can decat your car and still pass the MOT, Not sure about the ECU though
  2. R

    LPG now at 65.9!!!!

    still i seem to be paying over 10p more a litre than everyone else, not happy!
  3. R

    LPG now at 65.9!!!!

    hmm, am i right in saying when VAT was reduced they never reduced it on fuel, cigs, and booze? But when it went back up to 17.5% fuel, cigs and booze rose aswell?
  4. R

    LPG now at 65.9!!!!

    In south devon around Exeter. Am i being ripped off? Is there any cheaper places to get in like calor etc instead of off the garage forecourt
  5. R

    snow

    well we finally got snow today in south Devon just when i didn't want it. Removed my front propshaft last night as one of the UJ's failed badly and i need the car so it has left me with 2 wheel drive, and its bloody useless. Damn shame as i wanted to go playing in it, Oh well i'll have it...
  6. R

    P38 4.6 hse breking

    how much posted for suspension control height ECU?
  7. R

    P38 4.6 hse breking

    where is the car?
  8. R

    Clonking and vibration on p38. Help!!!!

    just to update you if it helps, i found my problem to be one of the uj joints on the front propshaft
  9. R

    p38 suspention help needed

    I would fix mine but i just cant get my laptop to talk to the car. I dont know what else to do
  10. R

    snow

    we dont have any in south devon yet, Enjoy!
  11. R

    I want to buy a Range Rover

    then just before you sign the v5 and hand your money over check coolant again!!!
  12. R

    p38 suspention help needed

    Air bags Left rear pin 11 Right rear pin 28 Left front pin 10 Right front pin 27 in turn you have to link pin 9 to go up and pin 26 to go down Pin 8 runs compressor And if you link pin 7 to 18 it gets rid of fault on the dash Good luck
  13. R

    p38 suspention help needed

    are you linking the connections on the EAS ECU plug or have you gone straight to the solinoids?
  14. R

    Clonking and vibration on p38. Help!!!!

    i also have the same problem, thought it was coming from my front diff, but after a little searching around looks like its more than likely to be uj joints on the propshaft. Good luck
  15. R

    I want to buy a Range Rover

    also check operation of gearbox, all modes and see if it selects hi and low ratios ok
Back
Top