Recent content by phatmess

I've got a 24v truck winch for sale any use to you?

I'll root it out this week, think its intact but I'll check and let you know

Ok now its running again. The fault was the fuel pump failed, it got left for months and the battery died and lost Becm, so fitted new pump and had Becm synced, has fixed it thanks for your help guys. Just need big tyres And bumpers now :)

The bulkhead is the main reason I'm selling it, it needs welding and work!

St7, Audley, near junction 16 m6

if i can help I'm breaking a series 2a 109 1963 Most parts available

I have power to the solenoid on back of pump? I'll put the pump on tomorrow and lets you know how I get on

Ok, I've had enough of tinkering for tonight. The fuel pump is scrap, I did remove it and put power to it, nothing small tap with the hammer, worked for a few seconds. And off again.... Right. So I'll order another fuel pump! There's a fuel stop solenoid on the injection pump, it has a 12v...

Ohh noo.... Thought I'd take some covers off and check the wiring on the old truck... After some poking... Someone's been faffing! I found a sensor on the pass side rear on the engine under the inlet with a home made earth? Possibly a heater plug mod, the fuel lines look empty. So I've checked...

Ok well i have plenty of options. 1. Sync Mate and hope the Becm is unlocked 2. Nanocom and hope the Becm is unlocked 3 buy a Becm ecu handle plus extras from a breaker 4. Send my Becm and ecu to callrova 5. Get an autoelectrician in to do it

Am I right I thinking the nanocom is the black box solutions diagnostic set, can I use this to code Becm's on all p38's?

New to the forum, I've brought a range rover p38. the engine turns over, heater plugs work, truck just doesnt inject fuel becm code has been lost so im looking for someone with a sync mate or software with capacities to code the becm im based at st7 Audley, i'm happy to buy unwanted...

old post.. but do you still have the sync mate? and the fault mate? Thanks