Recent content by lee 2110

thanx mate pm'd him

yeah thats what i thought i know daft question but wanted to make sure, any one got a diff lol:D

hi guys not been on for a while, once again after some of your good advise. when i first got my p38 it had a slight whine from a diff wasnt sure which one as it was real quite i didnt look into it, a few weeks ago i got a puncture on the n/s rear (im curruntly running 22" wheels) so i put my...

just thought id use this tread to see if any one has any ideas on my battery drain fault, just recently fitted a new engine previous to this battery only gone flat on me once, the past 3 days eveytime ive parked it up for the night come to it in the morning and its flat, battery only reading...

ill see what i can do ill post on back on here when i get a rad sorted and if it cures it or not thanx for the advice

yeah thats what i was thinking trust it to be bank holiday tho i might just put a water pump on it at the same time just so i know its right just dont understand how the temp stayed normal for longer when it had a poorly engine lol another 4 days without a car now bad times lol

top hose was hot and did have pressure in it but wasnt rock hard asif it would be if h/g had gone and if i left the car to cool for just a few mins the pressure got less to the point where i could take the cap of with out water gushing out

yeah started it with the cap off and heators on full on hot, waited for all the bubbles to clear coming from top of rad when water was flowing out put small pipe back on and left it ticking over with cap off temp was in the middle stayed the for ages didnt move coulnt get the water to be...

when its been run up i felt all round the rad and couldnt feel any cold spots, when i was flushing the system tho i put all the pipes back on and filled it with a hose pipe left the small pipe off that goes to expansion tank and the pressure to get the water to come out of the top of the rad was...

didnt fit new water pump with engine as the old one seemed ok,its really weird even with the old engine faulty block it ran ok till the coolant level dropped then it started to overheat but when topped back up and bled the water squirted out the top of the rad, now water is hardly coming out of...

let us know how it sounds if you remove centre box thinking of putting an exhust on mine when the funds allow it. like hear that nice v8 noise:D

dont know if it helps but i had a vectra v6 and had stainless exhaust put on it twin exit had bigger down pipes put on and strait through to the back boxes didnt make any difference running but was very noisy especially on a run the drone did my head in ended up taking it back and having a...

water is flowing no steam at all its not coming out fast tho not squiting and hittng the inner wing like i thought id should just dribbling out really, just fitted new stat and no difference at all

hi ive just fitted a new engine in my p38 4.0l due to a porous block, finished it today having trouble bleeding it up had it ticking over with top pipe off that goes to expansion pipe water seems to be running out the top of the rad fine heaters blowing nice and hot soon as i put the pipe back...

hi guys just building my new engine up just come to fit my cam gear and a bit unsure of the timing procedure can anyone help? looked on the net and cant find much on it...