Recent content by landytech
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
L
best thing to do go to your dealership, certin vin ranges have a technial test that has to be carried out to verify if it is your abs modulator, and yes if u fit a new modulator the ecu has to be cleared of fault codes hope this helps
-
L
well over here in oz hourly rate is 120 dollars an hour, and an average tech is paid between 17 to 25 dollars an hour, depending on how much training u have, apprentices start at 6 dollars an hour
-
L
Hey im from australia and i was just wondering what an technition gets paid over your way an hour and what is a landrover dealership average hourly rate
-
L
is your injector timing correct was it done proply when your cambelt was replaced could also be your injector pump
-
L
4 main bolts and 2 lower ones if i remember right
-
L
maybe some secrets, company policy
-
L
have a look in your engine compartment fuse box there should be two relays for your blower motors check if they are burnt or smell burnt, also could possibly be your blend motors
-
L
possibly, let me know once you have had a ganda underneath
-
L
yes i mean electrical, in the engine compartment fuse box, is the air sound like high pitch sound,
-
L
it is possible but unlikely, id do your headgaskets and also check to make sure your heater matrix o-rings arnt leaking need any more help just mail me
-
L
hi guys, love the forum, awsome, well im 19 apprentice tech at landrover and loving it, i think i got what they call landroveritis it is contagious
-
L
defently sounds like your fuel pump could possibly be the relay
-
L
abs sensors in your hubs, slide under your car and tap them down softley with a rubber hammer, also check your wheel beerings for play as they could be knocking the senors out causing a to large of air gap
-
L
hi on,y new to the site, seems good though, i shall let u know that u should have a recall carried changes the speed sensor in the auto box then should have a download on a new ecu if this dosen fix ya prob might need a new box, hope this helps