Classic ABS Fault

Hi all,

Can anyone suggest a fix?!
My 1991 3.9 SE has the ABS warning lamp on all the time.
When I got the car, it would come on an off at strange times. Now it is always on. Since having the truck, I have replaced the ABS Pump as it was very noisy, and ran almost continuosly.
The ABS appears to now work fine, but still the light is on!

Any help would be great,

Cheers,

Keith

abs sensors in your hubs, slide under your car and tap them down softley with a rubber hammer, also check your wheel beerings for play as they could be knocking the senors out causing a to large of air gap

Thanks for that.
Hopefully at the weekend I will get chance to get under and have a look.
I have fully rebuilt the front swivels. The light was always on before and after that! I will double check them, along with the rears.
I have read that the lamp relay often tests out OK - clicks etc. but is faulty?! Sound right??

The ABS appears to work fine - but this bloody lamp!!!

Keith

possibly, let me know once you have had a ganda underneath

SEVogue...i've a thread running on ABS/ETC faults on a 93 Classic Rangie...some helpful stuff coming up there...may be worth a look.

landytech said:

abs sensors in your hubs, slide under your car and tap them down softley with a rubber hammer, also check your wheel beerings for play as they could be knocking the senors out causing a to large of air gap

Click to expand...

Thanks. Seems to still work on P38s.