Recent content by hayzelden

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. H

    TD4 Poor starting, hot or cold

    Does anybody know whether there is a filter in the tank that can affect the pressure from the pump? Leaving an open end from the engine fuel filter and running the pump (new) the fuel does not spurt out. Could this be the starting problem?
  2. H

    Frustrated

    Many thanks, will try the cam sensor and lift pump plus filter. Spencer
  3. H

    Frustrated

    Freelander TD4. Have been having starting difficulty when hot. Tries to fire but does not run. Changed the fuel pressure sensor (£100) but still has the problem. Where should I look next? ANY IDEAS PLEASE.
  4. H

    Freelander TD4

    Have a problem starting sometimes. Seems to be a leak on the low pressure side. Any ideas where I should look? Seems like fuel starvation.
  5. H

    Very off colour 2,5 NA

    If I have a suspect head are there many different types that can be fitted to a 2.5NA? The pump and injectors have just been serviced. Any more ideas please?
  6. H

    Very off colour 2,5 NA

    I am getting very P****d off with this LR. I have bored sleeved back to standard so all is well down below. The compression is low but equal between cylinders---------very black smoke and no power. Before I got the vehicle a new head had been fitted I think to solve the bottom end. This being...
  7. H

    I have a 2.5 D NA ex MOD . Have sleeved and bored back to standard the bottom end . I have low...

    I have a 2.5 D NA ex MOD . Have sleeved and bored back to standard the bottom end . I have low compression on all cylinders and lots of black smoke (unburnt diesel? ) Have I missed something in the valve timing setup?
  8. H

    Not the sharpest tool in the box

    Can somebody please tell me where the B--- code reader plugs in. Have an 01 freelander.
Back
Top