Hi Guys,
The headlining in my 2002 P38 4.0 is knackered. I am about to pull it out and recover and I am pretty sure it is one piece. I have seen this used 2 piece one advertised on eBay at island4x4 ...
https://www.landyzone.co.uk/land-rover/fr-driveshaft-oil-seals-renwal.368856/post-5110175
Pic of modified adapter from my kit & 8mm through nut to separate hub from the carrier + a link for it in use (I used two opposite each other then just...
Thanks for the advice Phil. Having done plenty of other work on her I have plenty of penetrating fluid and the biggest blowtorch I could find , and of course an angle grinder lol :)
Thanks Andy. I am trying to avoid needing having anything to be made as don't have anyone to do it. So I'm hoping the larger kit will have everything I need fingers crossed !
Get a kit with the extra mandrels & sleeves. There's plenty on Amazon for around £60-£80.
Also you want lots of penetrating fluid & blowtorch to heat the ball joint surrounds.
Hi,
My lovely girl -2001 4.0 P38 just sailed through the MOT at a mere 160k. However we had one advisory that I knew was coming on the offside front lower control arm balljoint. Having a quick look on the internet pressing kits to remove/install...