I have a bit that could be what your looking for. No idea where it came from but it’s not off my series. 😳

Big lump of U channel with holes down the sides. Looks a bit like my series tow plate but bigger. No other parts with it. Just the plate.
 
Hi,
It sounds like the part that I want. Any chance you could send a photo of it to be sure.
Thx.
 
Hi,
It sounds like the part that I want. Any chance you could send a photo of it to be sure.
Thx.
I’m over at the lockup in the morning. I’ll see if I can find it. Can’t be hard it’s a sodding lump 👍
 
I can’t find the bleedin thing. 😳. I’ll keep looking as I’m sure I havnt binned it. Likely I’ve put it somewhere safe, like you do.
 
Be wary of used sliders. I bought one on eBay with a pin ball hitch. One of the holes was elongated as a result of a very heavy trailer and possibly a too thin pin in the slider which caused wear in it.
 
Be wary of used sliders. I bought one on eBay with a pin ball hitch. One of the holes was elongated as a result of a very heavy trailer and possibly a too thin pin in the slider which caused wear in it.
Comments noted. Thx
 
1716843660255.png
 
Last edited:
It is the bit that bolts on the rear cross member that the slider fits on.

So its the parts @Bobsticle has offered you & has posted pics of......

That's what bolts onto the cross member then the slider plate with tow hitch bolts onto it with the 2 adjustable pins going through it. Yes or no ...................
 
So its the parts @Bobsticle has offered you & has posted pics of......

That's what bolts onto the cross member then the slider plate with tow hitch bolts onto it with the 2 adjustable pins going through it. Yes or no ...................
He explained that. He already has the bit I have.
We need someone with the other bit to come forward. If they dare 🤣
 
He explained that. He already has the bit I have.
We need someone with the other bit to come forward. If they dare 🤣

Fk this thread I posted the link over a week ago of the plate, stuff it I will now delete it. 🤣
If you find the other parts to go with the parts you have I will have first dibbs 🤣
 
Fk this thread I posted the link over a week ago of the plate, stuff it I will now delete it. 🤣
If you find the other parts to go with the parts you have I will have first dibbs 🤣
I wouldn't mind a two pin one. My one pin is OK but I do tow heavy stuff and the two pins would give a bit more confidence.
 

Similar threads