blue beasty

Leaks an prone to bits dropping off
Anyone near Swindon got a Series rad?
On my way to London and sprung a leak :(
Sat in a layby on the A417 near South Marston
 
Anyone near Swindon got a Series rad?
On my way to London and sprung a leak :(
Sat in a layby on the A417 near South Marston
Wounder, can't help but I hope you've got cake to keep your strength up. I'm currently in Armitage shanks collecting a trailer load of toilets :D
 
A419 I think? Can't help either but is it too bad for Barr's Leaks/Radweld?
 
A419 I think? Can't help either but is it too bad for Barr's Leaks/Radweld?

Yep, my mistake, A419.

Not sure, trying gorrilla glue to plug it as a get me down the road bodge.

Waiting for a call back from Ridgeway 4x4 to see if they have one.

Any local factors would be useful if anyone knows any that will be open for more than the next hour.
 
Thanks @boguing, Brian at Swindon 4x4 has one, also shutting up shop at 1 so I'm going to leave the glue as long as possible to go off and then cross my fingers.
 
5 miles and 20 minutes through Swindon :confused: just topped up, still a small drip but not pouring out like it was. Lucky it's chilly and I noticed the heater blowing cold really.
Going to give it 5mins and go for it I think.
 
Get your engine warm and break an egg into the top of the rad!
It's a very old 'get you home' solution that actually works!
 
Made it to Swindon 4x4, new rad purchased and about to pull the old one out.

Thanks for the assistance
 
IMG_20171104_133103043.jpg
 

Similar threads