TD5 dash digital clock

I have only just noticed but when I turn my lights on everything lights up as it should but the clock doesn't??????
is there a bulb behind here that can be changed or is it a sealed unit? also if this can be changed how do I get the clock out I have searched on here but all relevant threads refer to earlier models
any advice is welcome

Hi, mine was the same, put a credit card above and below the clock, slide out, (remove the coin tray if it helps) and you will see a white section which you can unclip. Turn the rear of the bulb 90 degrees and remove then replace. Refitting, as Haynes say, is the reverse of removal....

Get an L.E.D. bulb as a replacement... should last a lot longer than a filament one.

Whippet said:

Get an L.E.D. bulb as a replacement... should last a lot longer than a filament one.

Click to expand...

Only wish you had said that sooner!!! lol:doh:

bjtd5

paul fletcher said:

Hi, mine was the same, put a credit card above and below the clock, slide out, (remove the coin tray if it helps) and you will see a white section which you can unclip. Turn the rear of the bulb 90 degrees and remove then replace. Refitting, as Haynes say, is the reverse of removal....

Click to expand...

As said above but remove the coin tray, it does help no end - belive me

bjtd5