Wings, vents and side repeaters

Ok now im awkward because i cant seem to find anything like what i want, i want 'both' wings to have side vents and td5/tdci side repeaters on do these exsist? If not would i be better buying two wings a 200tdi and a 300tdi wing so they have a vent on each side and recut the side repeater holes to fit td5/tdci side repeaters or buy two wings with vents and no side repeaters and cut the holes from there?
Cheers steve

Either or really. Why would you want both wings to have vents? I've just blocked mine up with aluminium cut to fit as I didn't use them

I like the look of two vents, mine has two fake one drilled on and looks good so would like both sides to have kbx side vents

I changed the old fashioned orange block side indicators for the new style smoked ones on my 200tdi. Not a big job, just measure properly then get to work with a drill and file to shape.

Looks good that, did you make a template or summat like that?, do you know if 200 and 300 have the same hole for indicator and in the same place?

I made a template out of card by measuring the hole required for the indicators then constantly adjusting to fit. My old repeaters were held on using 2 lugs, so the holes left behind gave me a reference line to position the template. Used a Stanley knife to mark out the hole to cut on the wing then drilled and filed the material away. Just takes some time to make sure it's in the right place.

Not sure if any difference between 200/300tdi. If all else fails you can buy outer wings with the vent and indicators ready cut in plastic or aluminium. One of the magazines fitted them recently I believe.

Cheers for that advice mate, ive only been able to find ones where they have a vent on one side for the pumas thats why i posted this lol