Henry_b
Think outside, no box required.
- Posts
- 15,503
- Location
- somewhere else
Other what have u done on ur disco today
- Thread starter gstuart
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 22,762
- Location
- In the next Glen
For you Kev a tenner
4 nearly new Goodyear Wranglers!
Special price good man
il take you out for a steak dinner & a few shandy's then. 
discodrivercumbria
Well-Known Member
- Posts
- 3,317
- Location
- South lakes
its a minefield out there, prices and mileage are all over the place, this has caught my eye for a few days now,,,, https://www.autotrader.co.uk/classi...s&sort=distance&maximum-mileage=100000&page=1
indeed it is
if I may suggest have a look on the d3 forum , as there’s some for sale and can see many well looked after
https://www.disco3.co.uk/forum/fs-d...f86.html?sid=0c68d067345b22c6e1f11eaff77837d0
Must admit really like this one and a lovely colour ,montalcino red
https://www.disco3.co.uk/forum/sale-my15-discovery-4-hse-lux-highest-spec-uk-186744.html
https://www.disco3.co.uk/forum/sale-my15-discovery-4-hse-lux-highest-spec-uk-186744.html
discodrivercumbria
Well-Known Member
- Posts
- 3,317
- Location
- South lakes
not really my cup of tea, want one un molested, a lot over 125k, just a bit of a worry as i like a nice wallet with money in it! lol
Henry_b
Think outside, no box required.
- Posts
- 15,503
- Location
- somewhere else
Just ordered a rear step
biketeacherdave
Well-Known Member
- Posts
- 4,854
- Location
- south east london
If you only need x2 seats then this is going up for sale shortly. Low milage no expense spared d3 commercial folder full of receipts for work carried out
- Posts
- 380
- Location
- Cheshire
Ordered some new front wipers as my current new front wipers are absolutely rubbish!
I’ve gone for Michelin Rainforce, hopefully better than my current rubbish!
I’ve gone for Michelin Rainforce, hopefully better than my current rubbish!
MOT due 7th March... Dropping the Disco in with my friendly welder, to stitch a patch on the chassis, near the gearbox. Just a n/s bearing and axle seal to fit, rear brakes, and a looksee over the old girl, and hopefully its a pass... Need to refit the engine cover to hide the EGR delete though...
JUKE179r
Well-Known Member
- Posts
- 3,166
- Location
- Suffolkshire
That's bad ass!!!
Back from welders. Needed a 6 inch patch. All good now. Trip to Craddocks this afternoon to buy rear brake carrier, brake calliper, brake hose, and all replacement bolts for both rear brakes. Might as well replace a few pipes whilst Im at it, just so the MOT man is happy.
- Posts
- 380
- Location
- Cheshire
Went down to the 4x4 expo at Staffs Show Ground in the D3
Landys everywhere!
I bought some bits and bobs ha
Landys everywhere!
I bought some bits and bobs ha
Lazydave
Well-Known Member
- Posts
- 193
- Location
- Birmingham
Had a play with the new polisher.
Had no idea that was on. Did a drive through last night and saw a fantastic looking Defender on the car park, but thought the Antique Fair was on this weekend.
Replaced the pipe that goes from the top of the rad, to the expansion bottle, as it snapped due to being brittle from engine heat. Worth replacing if you haven't done so, as it was about £8 and could literally land you in hot water if it breaks far from home.
Tidied up the wiring loom with some new split conduit, cable ties and fabric tape. Looks nice... Refitted the engine cover, to hide the non existent EGR valve, for the MOT.
Tidied up the wiring loom with some new split conduit, cable ties and fabric tape. Looks nice... Refitted the engine cover, to hide the non existent EGR valve, for the MOT.
biketeacherdave
Well-Known Member
- Posts
- 4,854
- Location
- south east london
Used it
- Posts
- 380
- Location
- Cheshire
it was pretty decent to be fair Tilly
Pappasmurf
Well-Known Member
- Posts
- 634
- Location
- Barnsley
Fitted new fuel cap cover plastic clip thingy. My first job on my new Disco.
