What’s this wire...purple/black dash?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

200sx

Member
Posts
56
Location
Hampshire
Found this wire behind my dash, seems to plug into left side of column. It’s been cut and replaced with a red wire then goes into engine bay and doesn’t connect to anything?

Any ideas? Should I remove and connect the purple/black back together

I also have this greenish/blue wire shown in last two pictures in engine bay, again connected to nothing. Anyone had any ideas ? It’s not connected to the red/purple/black wires I’ve mentioned above, seperate issue

cheers guys
 

Attachments

  • B30AB4BE-9C0E-42CA-8975-3A34BBD71909.jpeg
    B30AB4BE-9C0E-42CA-8975-3A34BBD71909.jpeg
    320 KB · Views: 95
  • E18AEA0C-CFC6-46EE-A2E6-3211FAAF0116.jpeg
    E18AEA0C-CFC6-46EE-A2E6-3211FAAF0116.jpeg
    282.1 KB · Views: 95
  • 8266518C-3A47-4F1C-BAD1-E5E8642BA8BD.jpeg
    8266518C-3A47-4F1C-BAD1-E5E8642BA8BD.jpeg
    330.2 KB · Views: 96
  • 89A96836-B938-45EA-A6BA-A07672DF64FD.jpeg
    89A96836-B938-45EA-A6BA-A07672DF64FD.jpeg
    435.9 KB · Views: 88
The green one goes to the sender next to radhose, its for the temp gauge.
Don't know about the other, on some years purple is horn I think
 
Seems correct, I’m guessing wires been cut and red wire ran straight to horn for MOT then horn removed.

where should the standard horn be as id like to return it to standard
 
Back
Top