Trouble with diesel leak

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

AnnuvaUser

New Member
Posts
3
Hi having problem with my 05 free lander 1 td4 … I have a diesel leak at the top of the engine , fuel is filling the area around the injectors I have cleaned up all the fuel started the car run it and slowly fuel is filling again but there’s no sign of where it is coming from? Can any one help
 
Hi having problem with my 05 free lander 1 td4 … I have a diesel leak at the top of the engine , fuel is filling the area around the injectors I have cleaned up all the fuel started the car run it and slowly fuel is filling again but there’s no sign of where it is coming from? Can any one help
It will be coming from one of two places, either one of the plastic T joints, has failed. or it will be one of the injectors, which part or which injector post is filling first.

8i6mPWql.jpg
1

Change them to brass ones.
sRngoIGl.jpg
2

dn6zUv5l.jpg
3

0FebrLfl.jpg
4

If it's an injector you will need to remove it and cleanout the port then add new copper washer to stop the leak.
5tQ8kmel.jpg
5

cSURyzHl.jpg
6

dyg5KP1l.jpg
7

QjQNOkHl.jpg
8
 
Last edited:
It will be coming from one of two places, either one of the plastic T joints, has failed. or it will be one of the injectors, which part or which injector post is filling first.
Thanks will clean it up and wrap
Some kitchen roll around each injector and see if I can see which ones leaking first 👍
 
It will be coming from one of two places, either one of the plastic T joints, has failed. or it will be one of the injectors, which part or which injector post is filling first.

8i6mPWql.jpg
1

Change them to brass ones.
sRngoIGl.jpg
2

dn6zUv5l.jpg
3

0FebrLfl.jpg
4

If it's an injector you will need to remove it and cleanout the port then add new copper washer to stop the leak.
5tQ8kmel.jpg
5

cSURyzHl.jpg
6

dyg5KP1l.jpg
7

QjQNOkHl.jpg
8
AnnuvaUser sorry for hijacking your thread but Artic where'd you get the brass ones? When I changed my injectors mine were looking a bit tired. Did replace the O rings with new though!
 
AnnuvaUser sorry for hijacking your thread but Artic where'd you get the brass ones? When I changed my injectors mine were looking a bit tired. Did replace the O rings with new though!
Hi Wizard link below.

 
Back
Top