darrenwall
New Member
- Posts
- 187
my disco failed the mot today on worn bushes on the rear trailing arms ( the big round ones that are towards the front of the car ) . can anyone give me any tips on how to do them and are they easy ish to do thanks
trailing arm bushes
- Thread starter darrenwall
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
They're easy to do, provided the bolts & nuts come undone and come out.
Give them a good wire brushing and soaking with GT85 first.
Undo the body end first, then the axle end, the arm will then just pull out.
Replace bushes with new ones and re-fit.
Are the axle end bushes OK? If they need replacing, it's a bit trickier getting the old ones out.
Paddocks do a kit of parts - bushes and bolts.
Give them a good wire brushing and soaking with GT85 first.
Undo the body end first, then the axle end, the arm will then just pull out.
Replace bushes with new ones and re-fit.
Are the axle end bushes OK? If they need replacing, it's a bit trickier getting the old ones out.
Paddocks do a kit of parts - bushes and bolts.
darrenwall
New Member
- Posts
- 187
the axle end ones are fine so it sounds easy enough so ill have ago at the weekend , thanks for the quick reply
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
If they're the same as a defender then they're pretty easy to do like Trewy says
http://www.landyzone.co.uk/lz/f41/lower-link-bushes-renewal-65096.html
http://www.landyzone.co.uk/lz/f41/lower-link-bushes-renewal-65096.html
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
If they're the same as a defender then they're pretty easy to do like Trewy says
http://www.landyzone.co.uk/lz/f41/lower-link-bushes-renewal-65096.html
I hope they're the same, cos I got a disco rear axle on me depender!
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
DOH!!! Forgot they're the same!!! Heids up me erse at the mo'!!!
Might be down your way on the 23rd mate fur a couple of pints... ooops! meant days
Just waitin' tae hear back from a couple of places.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
DOH!!! Forgot they're the same!!! Heids up me erse at the mo'!!!
Might be down your way on the 23rd mate fur a couple of pints... ooops! meant days
ooohhh!!
does yer wanna come shootin wiv us on 24th? yer'd be most welcome.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
When you remove the bolts the axle will want to move backwards, make sure you chock both rear wheels.
