torque settings

morning

sorry to trouble you all dropping to trans oil in my auto box and going to change the filter today

moved the gearbox mount and going to remove the sump and i cant find the torque settings for the sump bolts once i replaced the filter can someone help please. (haynes have no info) also where is the filling hole?

also how many bolts to hold the gearbox mount to the chassis (8 inc mounts)???????

i now have the decat pipe that i aim to fit whilt the mounting is out of the way job bdone i hope

thanks for your help

It helps if yu say what Disco it is. Also download the Rave.

yes sorry

its a 300 tdi and rave dont want to play on my windows 7 for some reason

cheers

Filling is via the dipstick tube/hole for the rest of the info as said RAVE. http://www.landy.pl/LandRoverDiscoveryWorkshop1995-1996.pdf

Ok thanks I'll have a look in a bit

Well I done the gearbox and all fitted went to tighten the bung bolt and it sheared off :-(

Any idea where I'll get one from ?

On the up side I fitted the decat pipe while I was at it so not all doom and gloom.

Recommend remove gearbox brace and it makes the hole job quicker to do

disco dude said:

Well I done the gearbox and all fitted went to tighten the bung bolt and it sheared off :-(

Any idea where I'll get one from ?

On the up side I fitted the decat pipe while I was at it so not all doom and gloom.

Recommend remove gearbox brace and it makes the hole job quicker to do

Click to expand...

O dear so u will have to remove the plug as usual drill a hole and with an 'easyout' or similar, when u do u will require RTC4647 plug and STC1060 washer and tighten by hand.

i removed the old bits from drain hole and its ready to roll.

i just need to get a new drain plug and its all good.

it was tight as hell in the hole removed it but when replaceing it i niped it up and it gave up.

stiil almost done.

not looking forward to filling the gearbox via the dipstick hole, is it eaiser to remove the dipstick and fill from under? the reason i ask is i use a garden spreyer to pump the oil into gearboxes, im hopeing i can do it this way as i drained out 7ltrs from it.

Are u sure 7 ltrs that's not normal, so easy to fill via the dip stick hole after removing the stick of course just pour in and check the level with the stick.

It was quite a bit yes I was expecting 5ltrs ok I will stick 5 in and see where we go.

Thanks for your help