Before you start I'll state that I'm being lazy!!!! However I know that you guys will know this off the top of your heads.
Can you tell me the thread sizes on a 1987 90V8:
a). The female threads on the fuel filter - the little filter on the out rigger underneath the bulkhead.
b). The female inlet thread on the girling clutch slave
c). The male thread on the end of the clutch flexi that attaches to the hard line from the master.
And a little more exotic...
d). The fuel inlet on an edelbrock 500cfm carb
e). The vacuum inlet on the same carb.
I'm trying to sort out the braided hoses for the clutch and fuel lines.
Thanks guys,
Jon
Can you tell me the thread sizes on a 1987 90V8:
a). The female threads on the fuel filter - the little filter on the out rigger underneath the bulkhead.
b). The female inlet thread on the girling clutch slave
c). The male thread on the end of the clutch flexi that attaches to the hard line from the master.
And a little more exotic...
d). The fuel inlet on an edelbrock 500cfm carb
e). The vacuum inlet on the same carb.
I'm trying to sort out the braided hoses for the clutch and fuel lines.
Thanks guys,
Jon