td4 stalling at 1200 revs

hello follow up post the one i submitted earlier regarding a change of intank fuel pump on a td4 2001 y reg,

the pump was gone so i replaced it with a good tested used one and it works ok with plenty of fuel delivery as soon as key is turned.

car starts fine and idles with no problem but as soon as it reaches 1200 rpm it stalls when restarted it does the same,


i have changed the fuel rail sensor but still the same please any ideas???

cheers

any ideas i have done a searh but cant find about stalling at 1200 revs

cheers

Will it rev well above 1200 when stationary?

Hippo said:

Will it rev well above 1200 when stationary?

Click to expand...

hello

no it idles around 800 fine then if you press the pedel slow or fast it stalls as soon as it hits 1200 revs

cheers

bandit600 said:

hello

no it idles around 800 fine then if you press the pedel slow or fast it stalls as soon as it hits 1200 revs

cheers

Click to expand...

Hi,

1200rpm is around where the turbo comes in.
I would be checking the turbo hoses and clips. Look for slits that look like they were made by a Stanley knife - give them a good squeeze as they are often difficult to spot. Especially underneath and on the inside of the 90degree bend one.

Singvogel.

Singvogel said:

Hi,

1200rpm is around where the turbo comes in.
I would be checking the turbo hoses and clips. Look for slits that look like they were made by a Stanley knife - give them a good squeeze as they are often difficult to spot. Especially underneath and on the inside of the 90degree bend one.

Singvogel.

Click to expand...

hello
thanks for the reply, i have checked all the hoses and all look fine,

cheers

just replaced the crank sensor on this and :rofl:it works, so no revs over 1200 rpm check this as your first port

cheers for the help guys

nice one!

glad you figured it out ..
i was betting it was a fuel pressure issue :-/

'n cheers for the info.