Land Rover freelander 2.0 TD4 3-manual 2002 TC and HDC come on after a while driving, and go off when you touch the brake.
Then sometimes again but also not.
Remschakelaar replace (stood up Bulletin Board as a possibility).
Now they're going burn after a while, but no longer from braking.
Only when I stop the engine restart, they masterfully put off the rest of the trip out. On-board computer fine with the following messages.
Motor has failed: P1E00 Can Bus, ABS has C1151disturbance Can-data, data C1220 C1221 gear selection, failure probability, brake pedal switch, electrical failure (this reset) does anyone know Council and what do these codes.
Gerard
Then sometimes again but also not.
Remschakelaar replace (stood up Bulletin Board as a possibility).
Now they're going burn after a while, but no longer from braking.
Only when I stop the engine restart, they masterfully put off the rest of the trip out. On-board computer fine with the following messages.
Motor has failed: P1E00 Can Bus, ABS has C1151disturbance Can-data, data C1220 C1221 gear selection, failure probability, brake pedal switch, electrical failure (this reset) does anyone know Council and what do these codes.
Gerard
