Steering Guard Opinions

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I seen a lot of Suzuki guys doing it - it's like a bobtail front

One guy I saw with a vitara had cut it back to the pulleys. The front edge of the steering box was sticking out through his new front plate!

With 31" Tyres it could nearly drive up a vertical wall!! :D
 
if the front has been 'Bull Nosed' you will need to either fabricate a steering guard yourself, but the steering arms will be so close to the front i doubt one would fit. So id just get some HD bars and leave it at that
 
yeah the front of the rangie just misses the front pulley wheel and the engine has been moved back tight against the bulk head with all the rads in the back of the motor. been looking @ making my own but there will be no angle on it, it'll be practically straight down from the bumper, so not much skidding ! will have a look at these hd bars, the steering arms have been re-enfoced with angle iron.
cheers

del
 
truck2.jpg
 
want to put some 2 inch lift springs with some larger tyres and a steering guard and should be alot better!
 
Back
Top