Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
In that case how much to buy yourshaha
I'd need about 12 grand to break even...
Some pics of my Disco :D
- Thread starter Mr Noisy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I'd need about 12 grand to break even...
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
sidewaysste
Active Member
- Posts
- 715
- Location
- Nottingham
Agreed.
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
Two awesome discos,just need Auf's in the middle for the next shoot
But mine's a bit gay!
chrisyleigh
Active Member
- Posts
- 773
Ouch !
Jw did u buy the lockers ? Or were they already in ?
And as ive learn u always loose money on modded cars ! Like well my old one ive lost out on 7k
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
The air lockers came out of another vehicle which I bought and sold, cost me a months work here and there to tidy up and sell the disco and about £350 for the lot in the end, noice.
They are 10 spline though so not as desirable as 24!
- Posts
- 14,902
- Location
- Doncaster
I know someone with a broken rear 10 spline ARB .. we're looking at fettling it with 24 spline (whatever the 300tdi is) outputs for my rear axle ..
Might make it a photo project if it works .. might not mention it ever again, mind!!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
That would be good if you can Paul, the only problem will be if it is the old type locker which most 10 splines were you can't get the parts for the old models now because they are discontinued
The old ones had a plastic cage in there which used to break apparently but as above you can t replace the bits anymore
Good luck anyway, if it is the new type or you can get the parts you simply need to swap the 10 spline sun gears for 24 spline and hey presto your locker is worth double
The old ones had a plastic cage in there which used to break apparently but as above you can t replace the bits anymore
Good luck anyway, if it is the new type or you can get the parts you simply need to swap the 10 spline sun gears for 24 spline and hey presto your locker is worth double
- Posts
- 14,902
- Location
- Doncaster
That would be good if you can Paul, the only problem will be if it is the old type locker which most 10 splines were you can't get the parts for the old models now because they are discontinued
The old ones had a plastic cage in there which used to break apparently but as above you can t replace the bits anymore
Good luck anyway, if it is the new type or you can get the parts you simply need to swap the 10 spline sun gears for 24 spline and hey presto your locker is worth double
That's what we're hoping, dunno how old 'old' is yet, but can hope .. but whatever, it's worth more than money for me to get one fitted and I like a fettling challenge .. me winch works well enough for less than £250 when I'd never have afforded a pukka Warn ... stuff just takes time and 'out the box' thinking ..
Be interesting to go up to see my son at Uni .. they have a few 3d printers .. if we could get an old style plastic cage in reasonable nick, or at least half a cage that we can extrapolate from ... He's doing Game Design and 3D animation/modelling!!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Would be interested to see pics once you get inside it pal
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
All the best mate
Dragonwalker
Well-Known Member
- Posts
- 3,303
- Location
- Out the back
That's what we're hoping, dunno how old 'old' is yet, but can hope .. but whatever, it's worth more than money for me to get one fitted and I like a fettling challenge .. me winch works well enough for less than £250 when I'd never have afforded a pukka Warn ... stuff just takes time and 'out the box' thinking ..
Be interesting to go up to see my son at Uni .. they have a few 3d printers .. if we could get an old style plastic cage in reasonable nick, or at least half a cage that we can extrapolate from ... He's doing Game Design and 3D animation/modelling!!
3D printers are to be sold at PC World and Currys.for £1195
- Posts
- 14,902
- Location
- Doncaster
Yeah, one that my son uses cost about £30k .. it isn't a 'toy' .. it actually makes real, decent quality, things and is used as an industrial rapid prototyping centre .. they also have other bigger and better ones ..
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
3D printer?!
Basically, machine that makes objects for you?! :jaw:
Basically, machine that makes objects for you?! :jaw:
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
thought you'd have seen one of them noisy, even I've seen one!
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
