krsmayo
Active Member
- Posts
- 223
- Location
- ware, Herts
does anyone know how to take the glass out of the sliding side windows on a 90, need to tint them
side windows
- Thread starter krsmayo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lerk
New Member
- Posts
- 1,763
- Location
- Creswell, Derbyshire UK
1 x housebrick, make sure you number the bits though or you'll never get them to stick back to the tint right! 
landy90will
Member
- Posts
- 83
dont think think they come out mate i had mine tinted while they were off the car.?
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Er..isnt that a complete contradiction??
It can be done - unscrew the top and bottom of the centre rail. Slide the glass into the centre and then very CAREFULLY prize the frame open (I hooked it on my feet and pulled with my hands! like rowing). When the frame opens sufficiently get someone else to lift the glass out.
Easier putting them back in.
Easier putting them back in.
slightly yes :crazy:
Shifty1962
Well-Known Member
- Posts
- 4,209
- Location
- The Winchester Club - Englandshire
They must come out because somebody put them in but how its done I have no idea. I'm guessing that there are rivets or screws down in the window channels that hold the frame to the body. You probably have to remove the complete frame in order to get the glass out.
