Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
On my way home today from work my D2 V8 auto started to shudder when I reached about 60/70 mph, anyone got any ideas as to what could be causing this.
Shuddering
- Thread starter Srm
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
I should add that it only happens when I let off the gas peddle; everything is smooth on acceleration and doesn't rumble until it coasts, in other words. Feels like I'm going over a rumble strip! I feel it through the floor mostly, doesn't shake the steering wheel all too much.
Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
Anyone???
Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
Surely someone has had this problem before.
shocker
Well-Known Member
- Posts
- 2,038
- Location
- BODMIN MOOR,KERNOW
UJs ?
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
I had a rumble when I had sloppy UJ's. Worth checking them, it's only a quick wobble 
Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
Uj's seem to be ok.
- Posts
- 66,951
- Location
- The Wooly Witch
Check the swivels, too much play can cause this.
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
All wheel nuts done up?
Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
Yep wheel nuts are tight. How do I go about checking the swivels?
ashley0511
New Member
- Posts
- 30
I had a similar problem and it was the track rod ends that had gone, I also replaced the steering damper.
Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
The track rod end were replaced 2 months ago, but the steering damper who knows.
- Posts
- 66,951
- Location
- The Wooly Witch
http://www.landyzone.co.uk/lz/f41/swivel-ball-renewal-63808.html
Read thru this it is a similar procedure on your model.
If you need more info, try a search, there are a few threads on oil /grease and swivel drivel in general.
Read thru this it is a similar procedure on your model.
If you need more info, try a search, there are a few threads on oil /grease and swivel drivel in general.
Srm
Active Member
- Posts
- 257
- Location
- Newtownards Co. Down N.Ireland
Well after alot of head scratching and so on it turns out that all that needed done was the rear passenger wheel needed balancing. A love cheap fix at £5.
Similar threads
