Really dumb and stupid post-how do you adjust and set up p38 headlights? Mine are one eye in the pot and the other up the chimney. The last time I did this the adjusters were 2 crosspoint screws at 12 and 3 o clock on round lights, help! I can't see without using posing ( sorry-fog) lights!
Setting up p38 headlights
- Thread starter davef2901
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
v8hotrodboy
Active Member
- Posts
- 522
- Location
- Dover
If i remember they are adjusted with and alan key via the top of the lamp unit.
v8hotrodboy
Active Member
- Posts
- 522
- Location
- Dover
Think one does up/down the other side to side, mine has the same lights as yours and im sure (i think!) thats how they work.
http://www.google.co.uk/imgres?q=ra...nw=231&start=113&ndsp=10&ved=1t:429,r:3,s:113
Found this pic, one adjuster is to the left of the red arrow, and the other is the same looking thing bottom left. Light in this photo is upside down but you get the idea.
http://www.google.co.uk/imgres?q=ra...nw=231&start=113&ndsp=10&ved=1t:429,r:3,s:113
Found this pic, one adjuster is to the left of the red arrow, and the other is the same looking thing bottom left. Light in this photo is upside down but you get the idea.
Last edited:
- Posts
- 58,170
- Location
- Preston Lancs.
You cannot set headlamp aim properly without a special beam setting tool. It can be done (if you know what your doing) with a made up shadow board, a wall and some dead flat ground. But you need to take it to your local MOT station if you want to have them set correctly.
