Series 3 Dash Pod Needed

Guys i need this part
the ones on fleabay are all RHD
my s3 is a lhd one.
Any advice?

I had the same problem a while back but found this. 346945 RHD INSTRUMENT PANEL | Land Rover Series 1948-1984: Interior: Dash | shop | www.lrseries.com | L. R. Series

hope this helps!

:rolly:
nothing?

Landyman17 said:

I had the same problem a while back but found this. 346945 RHD INSTRUMENT PANEL | Land Rover Series 1948-1984: Interior: Dash | shop | www.lrseries.com | L. R. Series

hope this helps!

Click to expand...

thanks anyway but
my s3 is Left Hand Drive...

74Series3 said:

thanks anyway but
my s3 is Left Hand Drive...

Click to expand...

hi there try calling hobson bros 07985758459

Part number for that is 346946, (LHD instrument panel) most places are showing out of stock.

4MuddyFeet Land Rover Parts & Accessories

Ring I guess for stock

42 quid is too much for that plastic (plus postage)
i should better search salvage parts or learn to live without it

74Series3 said:

42 quid is too much for that plastic (plus postage)
i should better search salvage parts or learn to live without it

Click to expand...

Whats wrong with what you got? mine was worse than that, stripped it down and sprayed it, jobs a gooden..

pegibson said:

Whats wrong with what you got? mine was worse than that, stripped it down and sprayed it, jobs a gooden..

Click to expand...

The one on the photo is not mine... i found it on internet
Mine has 2 major cracks on the left
i'll put some photos soon

chrislouth said:

hi there try calling hobson bros 07985758459

Click to expand...

let's try
thanks chris
do you know if they ship worldwide?

Still broken dash pod...

Can't you just glue it, put filler on it and paint it black? No-one will ever know

Make a steel one?

crashbox said:

Make a steel one?

Click to expand...

I started to do this, someone on here did a fully custom dash, it looked really sweet!

Are you going to a proper factory look or a working vehicle? Mine broke of where the washer switch is, i just made a aluminium plate to fit over and attatched it, it doesnt look that bad tbh.

Hi There,

A few weeks ago I purchased one at vandamlandrover in Rhenen, The Netherlands (just add www in front and .nl behind the name to get there)

At least they know the available stock....

Good hunting.

Marc

Thank you a lot guys
I am not doing a factory rebuild, left top corner is only broken, it can be repaired or a steel one can be made surely... but i am trying my chances, if i can't i will be doing it...

thanks a lot for vandamlandrover
i will contact them i hope they have one...