P38A Schraeder valves

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

oakey

Well-Known Member
Full Member
Posts
2,101
Location
Mull of Kintyre
1995 4,6
I bought Schraeder for my EAS ages and ages ago
I have now lost them
Can someone please tell me what size they are and where I got them?
They had wee blue inserts but I have no idea if they are colour coded.
ta much
 
1995 4,6
I bought Schraeder for my EAS ages and ages ago
I have now lost them
Can someone please tell me what size they are and where I got them?
They had wee blue inserts but I have no idea if they are colour coded.
ta much
Plenty advertised on Ebay specifically for the P38.
 
Beware you pick good ones on eBay. The set I bought leak through the valve inserts, but good enough for testing for leaks or to get me home as long as the caps are tight.
 
I made a set for next to .nothing. I went to a truck tyre place and scrounged a handful of used truck tyre valves. These have a long brass stem. I cut the bend off and just machined a little bit off to make the diameter the same as the EAS air line, 4 plastic airline couplers, job done, cost about £2.
 
The place that flogs them on ebay is near me. Wrekin pneumatics, dunno if that helps. Blue colour is usually 6mm but not always.
 
Did the same as Datatek and ran around for about a fortnight including a 250 mile journey home on them. The valve cores I used were 6mm after stripping off the rubber so I used a 6mm compression fitting and a push on connector to connect to the pipes that run from the air bags to the valve block. I carried them around in the car with a 12v tyre inflator knowing that one day I would need them......and of course I did. I would imagine that a tyre fitting place would let you have them for coppers if you could establish that they are the type with the brass insert.
 
Machining is beyond me lol and I will try Wrekin.
Only advert on ebay are £60 from Spain
I don't mind nipping down and getting you a set and posting them on to you if you get stuck. Can't remember how much they were now but not £60, got £24 in my head???
 
I don't mind nipping down and getting you a set and posting them on to you if you get stuck. Can't remember how much they were now but not £60, got £24 in my head???
Thank you
They dont list them on their ebay site
I will give them a phone ta
 
Thank you
They dont list them on their ebay site
I will give them a phone ta
I think it's a side hustle done by one of the employees who is a landy fan.
Whoever answers the phone might not even know what you are on about possibly. They aren't the most organised place I've found. But as keith has said but slightly different? I've read somewhere that car valves are 6mm so no shaving required?
I keep meaning to get some valves but I like living in the fast lane me, don't carry tools either:eek:
 
I used the valves from push bike inertubes they were 6mm you just had to cut the rubber of and clean it up, son works part time at a bike shop so had the pick of old ones , i should do a little side line of kits judging buy what is being charged:rolleyes: bag of 6mm push fits and sit there in the evening with a pint:D
 
I used the valves from push bike inertubes they were 6mm you just had to cut the rubber of and clean it up, son works part time at a bike shop so had the pick of old ones , i should do a little side line of kits judging buy what is being charged:rolleyes: bag of 6mm push fits and sit there in the evening with a pint:D
Good idea:)
 
I used the valves from push bike inertubes they were 6mm you just had to cut the rubber of and clean it up, son works part time at a bike shop so had the pick of old ones , i should do a little side line of kits judging buy what is being charged:rolleyes: bag of 6mm push fits and sit there in the evening with a pint:D
Interesting.
Think I've a tube or two somewhere.
Maybe we can go into partnership, I've got, I think somewhere, a few 6mm pushfits.
Briflo industries has a ring to it.:p
 
Interesting.
Think I've a tube or two somewhere.
Maybe we can go into partnership, I've got, I think somewhere, a few 6mm pushfits.
Briflo industries has a ring to it.:p


I have a few push fits, a mate used to work for Dennis busses and i got allsorts of goodies from him nuts, bolts, jubbly clips, wire wrap, rubber lined p clips, all handy stuff from when i was servicing on rally cars :D
 
Thanks for all your help I think I will get some push fits and valves from the tyre fitter but not sure if they will give me some cos only a wee place
 
Back
Top