So after much deliberation....
I finally have decided to replace my doors, i had the car washed today and the amount of water just seeping/running through was crazy..
After looking around i can get a pair for around £500 however then i need to get them painted, fitted with new seals and parts. I already have new door locks, mech and hinges i can use. I noticed the old hinges are a bit shot, the door moves vertical about 5mm on the far edge
I was also thinking of buying a pair of doors from a newer vehicle with electric windows, power locks etc. To save the hassle of rebuilding everything on to the new doors.
has anyone done this, any advice?
I finally have decided to replace my doors, i had the car washed today and the amount of water just seeping/running through was crazy..
After looking around i can get a pair for around £500 however then i need to get them painted, fitted with new seals and parts. I already have new door locks, mech and hinges i can use. I noticed the old hinges are a bit shot, the door moves vertical about 5mm on the far edge
I was also thinking of buying a pair of doors from a newer vehicle with electric windows, power locks etc. To save the hassle of rebuilding everything on to the new doors.
has anyone done this, any advice?
.have you taken door cards off to see how bad it is ?
