rear propshaft!!!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

JONNY O

New Member
Posts
25
Location
WHITSTABLE, KENT
good evening everyone.
im looking to replace the rear propshaft on my 90 tmw and was wondering if theres anything in particular i should be looking for, any common probs or troubles. is it as simple as it seems?
:) :) :) :) :) :) :) :) :) :)
 
why jack it up?
I can change the prop on my series by just crawling underneath!

agree with leavin handbrake orf tho, coz it means yu can rotate the prop to get to all the nuts.

dont forget to chock the wheels tho.
 
2 ring spanners, a short and a standard either 9/16" or 14mm should do ya. If you're mega spawny you can do all 8 bolts without jacking a corner up and twiddling a wheel, but you have to be a lottery winner to do it ;)
 
replaced rear prop no probs. only trouble was finding alot of play on the front shaft so just brought the part from flea bay. thanks for the guidance.
 
Back
Top