ajctraveler
New Member
- Posts
- 56
So I'm having a difficult time figuring something out and I wouldn't mind some outside opinions.
I got my car stock and it was perfectly level left/right. I had it modified with a bunch of things including medium load OME springs all around. The load in the back made the rear springs sag a bit so I decided to upgrade the rear springs to HD, again OME. Since putting on the HD rear springs the car sits noticeably lower on the left side side (no gas tank, lighter load), about 10mm. Originally I thought the springs might be handed, but they're not.
Is it possible that they were just seated improperly by the guy that did the install? Did OME just do a poor job of quality control? Any other ideas?
I am considering having them swapped left to right to see what happens and having a spring spacer on hand incase I have to go that route, but I'd rather sort this out logically before I'm on the clock to get it fixed at a shop..
Cheers
I got my car stock and it was perfectly level left/right. I had it modified with a bunch of things including medium load OME springs all around. The load in the back made the rear springs sag a bit so I decided to upgrade the rear springs to HD, again OME. Since putting on the HD rear springs the car sits noticeably lower on the left side side (no gas tank, lighter load), about 10mm. Originally I thought the springs might be handed, but they're not.
Is it possible that they were just seated improperly by the guy that did the install? Did OME just do a poor job of quality control? Any other ideas?
I am considering having them swapped left to right to see what happens and having a spring spacer on hand incase I have to go that route, but I'd rather sort this out logically before I'm on the clock to get it fixed at a shop..
Cheers
