RAMBIRKETT
Active Member
- Posts
- 154
Hey folks, thought i would start a wee thread for my 200tdi 90. I bought it back in april and since then i've been tinkering a fair bit with it. First major job was the bulkhead replacement ![Frown :( :(](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
![](/proxy.php?image=http%3A%2F%2Fimg33.imageshack.us%2Fimg33%2F6199%2Fa6x3.jpg&hash=f6b756a32cf13b3215442bb4e888a8bb)
I did start to patch it but it was to far gone.
![](/proxy.php?image=http%3A%2F%2Fimageshack.us%2Fscaled%2Flarge%2F845%2Frtsw.jpg&hash=92bb6a6c09f7492e8ec2a67f2709e520)
![](/proxy.php?image=http%3A%2F%2Fimageshack.us%2Fscaled%2Flarge%2F706%2Fxtm4.jpg&hash=ce1b07026be8f8801ca62d64c5ad3bc2)
Sourced an early td5 bulkhead, the upper section was in good condition only requiring the floor pans and feet to be replaced.
![](/proxy.php?image=http%3A%2F%2Fimageshack.us%2Fscaled%2Flarge%2F41%2Fizez.jpg&hash=84a8c6b0d23cc00dc48fdcc1ff3038df)
![](/proxy.php?image=http%3A%2F%2Fimg33.imageshack.us%2Fimg33%2F6199%2Fa6x3.jpg&hash=f6b756a32cf13b3215442bb4e888a8bb)
I did start to patch it but it was to far gone.
![](/proxy.php?image=http%3A%2F%2Fimageshack.us%2Fscaled%2Flarge%2F845%2Frtsw.jpg&hash=92bb6a6c09f7492e8ec2a67f2709e520)
![](/proxy.php?image=http%3A%2F%2Fimageshack.us%2Fscaled%2Flarge%2F706%2Fxtm4.jpg&hash=ce1b07026be8f8801ca62d64c5ad3bc2)
Sourced an early td5 bulkhead, the upper section was in good condition only requiring the floor pans and feet to be replaced.
![](/proxy.php?image=http%3A%2F%2Fimageshack.us%2Fscaled%2Flarge%2F41%2Fizez.jpg&hash=84a8c6b0d23cc00dc48fdcc1ff3038df)