probably a silly question
- Thread starter barndogg
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Playsatan13
New Member
- Posts
- 78
- Location
- Abergavenny, Wales
ebay, or buy a really buggered range rover on the cheap, at least then you can steal all the running gear too.
i've got a hybrid, it's a rangie chassis and running gear with defender and series body work.
i've got a hybrid, it's a rangie chassis and running gear with defender and series body work.
bencorkill
Well-Known Member
- Posts
- 2,426
- Location
- barnet , north london
Probably get a rotted rang rover cheaper than buying engine n running gear from a breakers plus you will get £ for scrapping the rest
kurgan
Active Member
- Posts
- 633
- Location
- Aberdeenshire
there is a rotten rangie in this months land rover owner mag classifieds at the back - 1980 3.5 v8 carb £350 Lanacashire
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
there are LOTS on ebay, but as above depends how much extra you want.
if carbs, you dont really need anything else other than the engine, need a low pressure fuel pump but the series pump will most likely be suitable anyway, and theres about another 4 wires, which the series will already have from the original engine!
if carbs, you dont really need anything else other than the engine, need a low pressure fuel pump but the series pump will most likely be suitable anyway, and theres about another 4 wires, which the series will already have from the original engine!
Knobwrot
Member
- Posts
- 35
- Location
- Colchester, Essex
Maybe obvious but you may want to get a Range Rover that's running and drivable.
I got an engine first which was outside the vehicle, which turned to be no good.
Although turned out alright as i manged to use the SU carbs to replace the stromberg's on the second engine.
Prefer the carb version too rather than efi , bit cheaper to fix and takes up less room in the bay.
Good luck in your hunt
I got an engine first which was outside the vehicle, which turned to be no good.
Although turned out alright as i manged to use the SU carbs to replace the stromberg's on the second engine.
Prefer the carb version too rather than efi , bit cheaper to fix and takes up less room in the bay.
Good luck in your hunt
Knobwrot
Member
- Posts
- 35
- Location
- Colchester, Essex
Stumbled accross this.....on fleabay: item No. 140875431815
Maybe of some use.
Maybe of some use.
Playsatan13
New Member
- Posts
- 78
- Location
- Abergavenny, Wales
if it wasn't the other side of the country i would snap that up for a rebuild project
kurgan
Active Member
- Posts
- 633
- Location
- Aberdeenshire
if it wasn't the other side of the country i would snap that up for a rebuild project
WheelCourier.com will pallet an engine to anywhere in UK for 49 quid plus vat
Worth a punt?
Playsatan13
New Member
- Posts
- 78
- Location
- Abergavenny, Wales
Awesome
Playsatan13
New Member
- Posts
- 78
- Location
- Abergavenny, Wales
saved that link for future reference, that will be great
