Position of USB socket?

Hi All

I am considering installing a USB socket just behind gear stick as on photo, so far I haven't checked on clearance behind panel which may prevent fitting
Is it a good position or maybe there are better and where would I pick up a live connection?
Thanks

Simple solution to this one is a plug in accessory socket with 2 usbs on. Fits flush in cigar lighter. About £3 on ebay.

andyfreelandy said:

Simple solution to this one is a plug in accessory socket with 2 usbs on. Fits flush in cigar lighter. About £3 on ebay.

Click to expand...

Andy, thanks for quick reply. I had considered this but I use cigar lighter socket for sat nav/dash cam

Border Boy said:

Andy, thanks for quick reply. I had considered this but I use cigar lighter socket for sat nav/dash cam

Click to expand...

You can fit some types of twin USB sockets in the spare window switch holes, if you have them.

Also a twin usb could feed your satnav too. I have seem then mounted in the left hand mirror switch blank. Hole looks about right size. I used the blank on right of steering column for small voltmeter. Dunno what switch should go there, below mirror switch.

andyfreelandy said:

Also a twin usb could feed your satnav too. I have seem then mounted in the left hand mirror switch blank. Hole looks about right size. I used the blank on right of steering column for small voltmeter. Dunno what switch should go there, below mirror switch.

Click to expand...

I didn't realise a sat nav would work off a USB port, I thought it had to be 12 volts

Border Boy said:

I didn't realise a sat nav would work off a USB port, I thought it had to be 12 volts

Click to expand...

Dash cams and sat navs normally have mini or micro USB sockets to provide them with power. This makes them use a 5 Volt input to comply with the USB standard.

Nodge68 said:

Dash cams and sat navs normally have mini or micro USB sockets to provide them with power. This makes them use a 5 Volt input to comply with the USB standard.

Click to expand...

I've got a suitable cable so I'll give it go using the USB socket
Nodge, thank you and everyone for their comments in this thread

Thanks for post. Would be great if everyone asking questions fed back and acknowledged the time and effort made by others as you have done!