freight666
Member
- Posts
- 31
I want to change the plastic valve thing that sits between the carbureter and the vacuum advance on the distributor cap,does it have a name and any ideas where I could get one
Plastic valve
- Thread starter freight666
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 7,602
- Location
- west wales coast
What engine?
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Is it on here, sorry bud but I've got a diesel so I can't go and check on mine
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
freight666
Member
- Posts
- 31
Sorry my friends v8,3.5
hctbn
Member
- Posts
- 42
- Location
- Bracknell, UK
It's a Vacuum Delay Valve and the part number for the V8 is apparently ERC6997, and ERC8119 for the 2.5. According to Land Rover Workshop its about £30 for the V8 and £65 for the blue 2.5 one but you can get the V8 on ebay for about £25 - a good search might find a sensible price for the blue one.
I did a search for what it did, cleaned it, gave a good suck to test it, and put it back on - but make sure you get it the right way round!
Good luck
I did a search for what it did, cleaned it, gave a good suck to test it, and put it back on - but make sure you get it the right way round!
Good luck
Similar threads
