p38 hi level brake light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rick071155

rick071155

New Member
Posts
487
Location
bolton lancashire
hi all can any one help , i bought a hi level brake light for my p38 its an o.e one , i took down the panel and found the lead it plugs into and the blanks that need to be removed but to make it dead right i obviously need the mounting bracket or whatever it screws to then once thats done there must be a panel of some description to gain access to the lamp from inside the car , does anybody have an exploded parts diagram or something similar to enable me to see what i am missing thanks.
rick.
 
I would be interested as well as mine does not have the High level light fitted.
It is good news that the wires are already there.
Rick if you don't mind me asking what sort of light did you buy and does it fill the hole correctly ?

Jim
 
hiya jim the lamp i bought came in landrover packaging , its an oblong lamp with the correct plug on the end to plug into the existing wiring already in the tailgate , although when i checked this i found when i checked for a feed when the brake pedal was pressed there was nothing , so maybe the other end needs to be plugged in , i dont know yet , as for mounting the lamp its not possible as yet i can only assume that there are a couple of moulding required to enable me to do this , when i get my head around it i shall let you know mate .
rick.
 
rick071155 said:
hiya jim the lamp i bought came in landrover packaging , its an oblong lamp with the correct plug on the end to plug into the existing wiring already in the tailgate , although when i checked this i found when i checked for a feed when the brake pedal was pressed there was nothing , so maybe the other end needs to be plugged in , i dont know yet , as for mounting the lamp its not possible as yet i can only assume that there are a couple of moulding required to enable me to do this , when i get my head around it i shall let you know mate .
rick.
Click to expand...
did you find out how to connect it up?
 
You must log in or register to reply here.

Similar threads

T
P38A Heater problem - stuck on demist
2
Replies
22
Views
1K
tank93
T
feyniriel
P38 key not locking the car
Replies
10
Views
395
Rubberknees
Rubberknees
J
Brake light above sparewheel
Replies
2
Views
441
Wizard2003
Wizard2003
TheYellowLandy
SIII - Brake warning light issues
Replies
9
Views
774
TheYellowLandy
TheYellowLandy
M
RR p38 HSE 4.6 1996
Replies
9
Views
938
Datatek
Datatek
Back
Top