Oil presure guage pipe

Does anyone know whare the pipe fron the oil presure guage goes to on a 2.25 petrol. as i carnt find anyware for it.

Thanx in advance.

Top of the oil filter assembly

the sender on top of the oil filter only has a connection for the oil pressure light, dose this mean that i need a different one.

you should be able to get an adapter fer it

As Slob says, you need an adaptor for it. I could not find anyone who sold them for my diesel though. You need a bolt like bit which gets a banjo bolt around it, essentially making a t-piece. This allows you to have the pressure gauge and the warning light functioning. I went for months with just the gauge whilst I ordered that was supposed to fit. After receiving about 4 different bits that would not fit, I got a mate to braize the two closest fitting parts together. The problem was getting the right thread sizes. None of the usual suspects and holden.co.uk and other like suppliers nevva had the bits either.

Here's a photie

summat like this

The Mad Hat Man said:

summat like this

Click to expand...

I got about 4 of them that won't fit.....

The tee pice must have a coarse thread as the thread in the filter housing requires same. the adapter for the pipe will be a much finer thread like that shown in the pic above.