peter8315
Active Member
- Posts
- 724
- Location
- Ilkeston, derbyshire
fitted a 2.2 5 bearing diesel standard engine, and noticed i have an oil leak coming from the rear of the sump at the joint, sinse then i have fitted two new sump gaskets (not together ) using a smear of silicon on the gasket, and i still get a small leak at the rear, i am beginning to think that it might be coming from the joint between the flywheel housing and the block, has that joint got a gasket?, or could it be the rear crankshaft oil seal, although i have no oil coming out of the wading plug.