JCH
Member
- Posts
- 65
- Location
- Woodford Halse
Just had a fault message on the screen on my P38 which states "RH Front Window Not Set" along with the audible alarm. Does anyone know what this means?
Not Set??
- Thread starter JCH
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
It means you cant read your manual
JCH
Member
- Posts
- 65
- Location
- Woodford Halse
Well done, think of that on your own?
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
No, I posted a question on a website looking for help
Ed Foster
New Member
- Posts
- 121
- Location
- Oxfordshire, UK
It means your one shot up/down isn't working.
Lower the window with finger on the button when it gets to the bottom hold it for 2 seconds then raise the window and at the top hold it for 2 seconds! This should reset it!
Lower the window with finger on the button when it gets to the bottom hold it for 2 seconds then raise the window and at the top hold it for 2 seconds! This should reset it!
JCH
Member
- Posts
- 65
- Location
- Woodford Halse
Thanks Ed.
It is to calibrate the upper and lower limits of the window travel so that it can detect a child's neck easier so it doesn't choke them to death when you use the one touch close 
It usually occurs when your battery has been off. You can get the same message with the roof
It usually occurs when your battery has been off. You can get the same message with the roofJCH
Member
- Posts
- 65
- Location
- Woodford Halse
Thanks again, worked a treat.
