no supply to abs ecu help needed !!!!

hi guys looking for some help have the abs light on on my w reg freelander as the speedo is inop i take it the light wont go out until it knows the car is moving i have a supply to the fuse in the fuse box inside the car but no supply at the abs ecu i dont know where the wiring goes or where i should have a supply any help would be greatly appreciated thanks

OK,well you should have 12v Permanent at pin B1 which is Brown/pink,Check for switched feed with ignition on on at pin b2 12v light green. Check for permanent ground at pin b12 which is black. Check for feeds at fuses f32 and f7. Check for continuity between fuses and abs ecu as there are no splices if you have no continuity theres your fault, if all else checks out i'm afraid you lookin at a new abs ecu.....