Need help from someone who has a 3.5 EFI (flapper)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

discopaul

New Member
Posts
571
Location
Chesterfield
Ive been trying to set up my V8 and also as ive just put in in my landy but ive messed it up and now i have no idea were to atsrt at again. the plugs are wet and well sutted up. it wont fire up either. ive lost the postion were the Co2 screw was at.

any chance some one could measure there Co2 screw from the to of the screw to the top of the casing just so i have i rough guideto were i need to be other wise i cant get it running again.
 
3 cd's worth and definitely workshop manuals- have you looked at range rover classic efi
 
ive got that manual and it only realy shows you the electrical side to it and mantinace. it does not say anything about intial set up
 
Hi,

I had a look at mine today, and the mixture screw sits about 19mm down from the top.

I used a long setscrew and a nut to give me depth.

Hope it helps,

Kieran
 
Just picked up your post, glad that someone has finally given you the basic info. that you were asking for. Having got your lump running you will need to have it checked with a co2 meter as, assuming the AFM is working correctly, quite small adjustments (ie. a quarter turn) to the setting may not make any detectable difference to the idle but will effect the readings & thus the MOT test.
 
Back
Top