n/s/f rumble

Hello, help,I can hear and feel a slight rumble from the n/s/f on my landy,when turning right in my landy,any suggestions what this could be.Very concerned!

n/s wheel bearing

anti roll bar link if it is they are only £10 on bay get your hand underneath and cheak it for freeplay good luck

jamesmartin said:

n/s wheel bearing

Click to expand...

Thanks,would it be best to replace it or tighten it,....If i need to replace it do i need any special tools,

you cant tighten them ,best thing would be to get bearing and undo assembly from strut and get local garage /eng shop to replace bearing

jamesmartin said:

you cant tighten them ,best thing would be to get bearing and undo assembly from strut and get local garage /eng shop to replace bearing

Click to expand...

James is right - they are not adjustable.

I would caution against trying to do any of this yourself unless you are really capable and have the correct tools.

To remove the hub/wheel-bearing assembly you will have to undo the drive shaft nut which is very, very tight - 400Nm - that is not so easy to take off or re-tighten correctly. You are going to have to go to a garage to get the bearing replaced anyway - unless you have a bearing press.

I try to do everything myself, and actively encourage others to do what they can, as most tasks are fairly easy - with a little bit of know-how. This is not one of them. I know my limits and want to keep the skin on my knuckles.

Singvogel.

nut is the easy part and an exact 400nm isnt critical as long as nuts tight ,bearing replacement can be tricky even with correct tooling,inner race tends to stick to drive flange bloody tight