simonmc73
New Member
- Posts
- 86
- Location
- Outside Bournmouth, Dorset
Hi guys,
Here are a couple of pics of my disco.
It has seen alot of work this weekend but not as much as i would have liked due to parts not turning up. So far i have:-
Got bumper corner from scrappy.
Fixed the rear door cenral locking.
Fixed the gearbox bias plate.
Removed, regreased and refitted the stuck diff lock mechanism.
Removed the intercooler and pipes and cleaned out the oil.
Today i hope to:-
Get the re-welded handbrake lever back in so it no longer pinches my hand agaist the console..
Put console back in.
Put dash back together.
Re-route the breather pipes so that it no longer feeds oil into the intake.
Remove bumper and paint it and fit new corner piece.
Paint the ali doorcard for the rear door and fit it with rivinuts.
Fit the rivinuts for the rocksliders in the sill.
Refit the bumper and put on the bull bar.
Should keep me quiet for the day..
Regards Simon.
Here are a couple of pics of my disco.
It has seen alot of work this weekend but not as much as i would have liked due to parts not turning up. So far i have:-
Got bumper corner from scrappy.
Fixed the rear door cenral locking.
Fixed the gearbox bias plate.
Removed, regreased and refitted the stuck diff lock mechanism.
Removed the intercooler and pipes and cleaned out the oil.
Today i hope to:-
Get the re-welded handbrake lever back in so it no longer pinches my hand agaist the console..
Put console back in.
Put dash back together.
Re-route the breather pipes so that it no longer feeds oil into the intake.
Remove bumper and paint it and fit new corner piece.
Paint the ali doorcard for the rear door and fit it with rivinuts.
Fit the rivinuts for the rocksliders in the sill.
Refit the bumper and put on the bull bar.
Should keep me quiet for the day..
Regards Simon.