Lift spacers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
There are full fitting instructions + a diagram for making the spacers in the link if you read it
 
The other drawing shows 3 holes as an equidistant triangle

the rear definitely isn't, and the front has nothing to denote that they're equally spaced...

If anything, on the front's the top hole looks bigger than the other two as well, pretty difficult to make something usable from those drawings I'd say!
 
whats it mate to - I assume the holes are to align with something else?

Top of the struts, same idea as my FL1 lift kits, but on them the spacing isn't equal between all the holes, neither front nor rear, so unlikely that the spacings will be equal on the FL2 either.

Best way for someone to make themselves a set of spacers is to get a front and rear strut and draw the pattern out, that way its guaranteed to fit first time :D
 
in that case, Sir, I bow to your superior knowledge.

The drawings are crap :)

yes-sir-bow-down-smiley-emoticon.gif
 
Back
Top