Leaking 200tdi fuel injector pump

My defender 200tdi is leaking diesel from the injector pump, looks as though its leaking from a gasket at the point where the castings are mated (around the area of the fuel cut off solenoid). Is it possible to split the pump and change the gasket or is it a new injector job?
Any help appreciated as Ive done a search and found nothing

Yes all the seals and gaskets in injection pumps can be changed. Some can be done in situ, some need the pump taking off, if it's the one I think it is you could do it on the engine. Another option is to get it rebuilt by a injection specialist for about £120 - then you know it's good for another couple 100 thousand miles!

rebuild ? average cost is £400 -£500 ,clean and test might be £100










3

£120 and my local Cummins shop will REBUILD my Bosch VE.

I've had a leaking o ring changed before now on an injection pump for a few quid .

Ok, I know where the leak is from and how to repair but Im a little perplexed.

I have the huge land rover manual (about 2000 pages) its telling me how to remove the pump, setting engine at TDC blah blah but there is one thing Im unsure of, in the manual it states this job requires 3 specialist tools, 2 of these are timing pins, one for the flywheel and one for the fuel injection pump but the other is a fuel injection pump gear retaining tool, does anyone know if I actually need to use this and if so do they know where I can get one from or preferably provide me with dimensions so I can make one.
Cheers

Here: LAND ROVER DIESEL ENGINE TIMING KIT 200TDI 300TDI 2.5D 2.5TD ENGINES CARRY CASE | eBay

DEFENDER90-DAZ said:

Here: LAND ROVER DIESEL ENGINE TIMING KIT 200TDI 300TDI 2.5D 2.5TD ENGINES CARRY CASE | eBay

Click to expand...

Top man

just used the same kit to do my timing belt