Into the Cabin

Knobblywobbly · Jul 16, 2010

I need to get a couple of thin wires from the engine bay into the passenger cabin, preferably on the drivers side. Is there any simple way to do this, i.e. are there any existing routes which can be followed easily?

Thanks

Missing Link · Jul 16, 2010

The RAVE disk has a section on fitting optional extras which include running cables as you require. This is quite useful as it incudes diagrams

Optimus Prime · Jul 16, 2010

there is a grommet which is do-able drivers side, hard to explain, but it is do-able, the main grommet with all the cabling is a no go as it's jammed tight

Knobblywobbly · Jul 16, 2010

Missing Link said:
The RAVE disk has a section on fitting optional extras which include running cables as you require. This is quite useful as it incudes diagrams

Unfortunately my RAVE disk has just gone belly-up!!! Any chance of posting the relevant page please?

2.0_hippo · Jul 24, 2010

the front right side of the engine bay has a couple of spare unused cable entrys into the cabin, i used these then just run the cable to the drivers side once in the cabin.

Into the Cabin

Knobblywobbly

New Member

Missing Link

New Member

Optimus Prime

Well-Known Member

Knobblywobbly

New Member

2.0_hippo

Well-Known Member

Similar threads