09richardk
Member
- Posts
- 79
- Location
- Nottingham
hi has anyone got a picture on the courtesy light plunger on the back door as it looks like I have something missing as when the door is shut it dosent make contact
interior light plunger on rear door??
- Thread starter 09richardk
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kes86
Active Member
- Posts
- 775
- Location
- Isle of Man
There is a tag on the door on mine which pushes against it, I would get you a photo but it's snowing 
I'll be out on the school run soon, so can get one then.
I'll be out on the school run soon, so can get one then.
kes86
Active Member
- Posts
- 775
- Location
- Isle of Man
There you go....
kes86
Active Member
- Posts
- 775
- Location
- Isle of Man
Point taken, but I am worried about the grease assisting it to fall off quicker!!
09richardk
Member
- Posts
- 79
- Location
- Nottingham
Thanks for the info looks like I've got the plate missing and the plunger the wire had been cut and taped into the loom
09richardk
Member
- Posts
- 79
- Location
- Nottingham
Does anyone no the part number for the bracket?
kes86
Active Member
- Posts
- 775
- Location
- Isle of Man
You need a bit of alluminium and bend it to that shape and pop rivet it on. One of them alley coat hooks would do it.
Similar threads
Freelander 1
Tailgate door