indicator trouble

Hi Guys
Ive recently brought an S reg freelander its been in the main dealer service station my problem is when i go to indicate left or right it cuts the main electrics all the main dealer said it was the earthing cables had corroded they changed them and said it works fine, driving today it cut out two times sometimes you can go a week before it happens any ideas as its getting a joke.

cheers:search:

:doh:
There's only one answer in this section....burn it...if you want any other answers I suggest you post again in the Freelander section

try the word twice and thats what i suggest a gallon of petrol "burn it" then try another gallon to make sure its dead.
So to sum up you need to burn it twice and not "two times" by the way welcome

you can get away with burning it just once. butt it must be done right

use hand signals

flasher unit.......check that.

Then id pull all indicator bulbs out and check there ain't a short on LHS or RHS circuit using a beep meter.

Failing that go here:eBay - one of the UK's largest shopping destinations and search for "discovery".......I'll leave the rest to your financial standing