immoboliser issues.....
- Thread starter elsie52
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
PopPops
Well-Known Member
- Posts
- 451
- Location
- Fareham, Hampshire
You are very welcome and I was only repeating what I've learned on here over the years.
And thank you for letting us know the outcome, so often it just goes quiet and we don't know if the car was fixed or scrapped!
- Posts
- 41,212
- Location
- East Dorset
Sooooooo chuffed for you!!!!!
sierrafery
Well-Known Member
- Posts
- 17,108
- Location
- Arad/Romania
Hi, it will happen again cos that's how the immobliser works so you'll have to keep entering the EKA code to start the vehicle if you dont unlock with the fob or find somebody with nanocom or similar to disable the immobiliser and set the alarm to "always disarm with key"...here's some info https://www.landyzone.co.uk/land-rover/recommendation-for-d2-owners.184078/ . Good luck
Thank you, will follow that advice
There is a generic override code which your Disco' man obviously knew.
Now you are in I would do a couple of checks. Remove the receiver in the rear of the headliner and make sure it is dry.
You can disconnect, carefully pop it open and then leave the circuit overnight in a bowl of dried rice is my recommendation.
Refit with a bead of silicon to keep it dry.
Around the ignition key is a receiver, I have not known these fail but make sure the connection is sound with no damage.
Good luck.
Now you are in I would do a couple of checks. Remove the receiver in the rear of the headliner and make sure it is dry.
You can disconnect, carefully pop it open and then leave the circuit overnight in a bowl of dried rice is my recommendation.
Refit with a bead of silicon to keep it dry.
Around the ignition key is a receiver, I have not known these fail but make sure the connection is sound with no damage.
Good luck.
