How do you change the Pressure switch?

Hi guys. I've used the search feature but to no avail. Can somebody tell me where abouts the Pressure Switch/Pressure release valve for the EAS is? Im just trying to go through the usual problem and fixes to sort my EAS fault out.
My L322 has had an LPG conversion and so the compressor has been relocated in the rear side compartment in the floor above the off side rear wheel and is now surrounded by foam and a bit of a git to access.
Are there any links to some pitcures showing where it is on the compressor and how to tell if it's nackered?
Cheers guys.

Lovely weather ay?

Was this a daft question or something then??? lol

No.
Firstly it's an L322 and we're more Classic and P38 types.
Secondly it's been 'got at' so it could be anyone's guess what's been done to the pipework.
It looks a bit like you're on your own and you're going to have to track the pipework or the wiring to the compressor.
Sorry!

dogsbody said:

No.
Firstly it's an L322 and we're more Classic and P38 types.
Secondly it's been 'got at' so it could be anyone's guess what's been done to the pipework.
It looks a bit like you're on your own and you're going to have to track the pipework or the wiring to the compressor.
Sorry!

Click to expand...

Oh ok fair enough. Is it even on the compressor though? Or in the valve block? Don't want to flaff about trying to find it on the compressor if it's not even on there! lol
I know what the thing looks like....just don't know where it is. :doh:

In the P38 its on (actually under) the valve block. Haven't you access to a copy of Rave?

No i don't. How do i get a copy of the rave manual? Cheers mate.

Pressure switch is on valve block. Unscrew it and fit new one with a little sealant on threads. You will have to remove wires from multiplug. Do this by removing inner spacer then you will see tangs to flick back with a small screwdriver to release pins.

Cheers Warmers.