Hole in my brake pipe

Hey,
I've just replaced my brake master booster in my 1989 Land Rover Perentie 4x4 and discovered a hole in a brake pipe that the old cylinder wasn't pushing fluid through.
The hole is just near the master cylinder and was caused from it rubbing on the air intake hose.
What's my best bet in fixing this as I there are no brake specialists nearby and its in a bit of a tight spot so I doubt I'd be able to fit some sort of union.
Thanks in advance.

If you don’t have the equipment to make a new pipe, your options are take it to a garage/mechanic, or buy a new pipe on line.

New pipe
The kunifer pipe is sold by the reel in kits with unions (old stuff is normally 3/8, newer 10mm) and a cheap flaring tool, the lot together is under 50 UK pounds.
Oh and a litre of brake fluid.

If not done one before do as Meego suggest and pay a mechanic.